Outback Power Systems FLEXnet DC Users Guide - Manual (Page 27)

26
ADV/DC/PAGE 1----------------
choose category
ADV BAT SHUNT PG2
Press the soft key.
Use the low volts screen and the and soft
keys to control the AUX by a low voltage value. Press the
soft key to view the SOC high % screen.
ADV/DC/AUX LOW VOLT------
low volts vdc
DOWN INC DEC TOP
Press the soft key.
ADV/DC/PAGE 2-----------------
choose category:
PG1 CHARGE AUX PG3
ADV/DC/AUX SOC HIGH--------
SOC high %
DOWN INC DEC TOP
Pressing the or soft keys will manually shut the
AUX off (the relay is open) or turn it on (the relay is closed),
respectively. In AUTO mode, the AUX is controlled by user-
determined set points. After setting the AUX control, press
the soft key.
ADV/DC/AUX CONTROL--------
currently: Auto On
DOWN OFF AUTO ON
Use the high volts screen and the and soft
keys to control the AUX by a high voltage value. Press the
soft key to view the low volts screen.
ADV/DC/AUX HIGH VOLT------
high volts vdc
DOWN INC DEC TOP
Use the and <DEC> soft keys to change the SOC high
percentage to trigger the AUX function. Press the
soft key to view the SOC low % screeen.