Outback Power Systems FLEXnet DC Users Guide - Manual (Page 26)

25
The return amps screen allows the user to set the end of
charge amps using the and soft keys. Press the
soft key to view the battery charge screen.
ADV/DC/CHARGE--------------
return amps
DOWN INC DEC TOP
ADV/DC/CHARGE---------------
battery charge
DOWN INC DEC TOP
Press the soft key.
ADV/DC/PAGE 2----------------
choose category
PG1 CHARGE AUX PG3
Set the end of charge voltage using the or
soft keys. Next, press the soft key.
Press the or soft keys to determine the
amount of time the charge parameters must be met before
they are considered an accurate state of charge. The default
period is one minute. By establishing a time, momentary
spikes in voltage are accounted for. Press the soft
key to view the charge factor screen.
ADV/DC/CHARGE---------------
parameters met time
minutes
DOWN INC DEC TOP
Set the charge factor (see page 13) using the and
soft keys. When fi nished, press the soft key.
ADV/DC/CHARGE--------------
charge factor %
DOWN INC DEC TOP
Press the soft key.
ADV/DC/CHARGE--------------
charge parameters
complete
TOP ADV MAIN
Press the soft key.
ADV--------------------------------
choose device:
FX CC DC MATE