Outback Power Systems FLEXnet DC Users Guide - Manual (Page 19)

18
DC BAT 12.5V 99%
Bat -0.6A 0.000kW
Net -4AH 00.7kWH
Days Since Full 4.8
The fourth SUM screen shows:
• Battery voltage
• The current state-of-charge
• Battery readings show the instantaneous amp, amp hour,
kilowatt, and kilowatt hour fi gures. When comparing the
amp hours reading to “FULL,” the fi gure is charge factor
compensated.
• The number of days since the battery last met the charge
parameters.
Press the fi rst soft key to return to the MAIN screen.
Press the soft key to open the STATUS screen to view
the status of either the FX, Charge Controller, or (FLEXnet) DC
MAIN------------------------------
11:30:55A
SUM STATUS SETUP ADV
Press the soft key to view the status of the (FlexNet) DC
STATUS
choose device:
FX CC DC MAIN
Press the soft key to view the (FlexNet) DC meter
readings.
STATUS/DC/PAGE1 --------------
STATS
METER SHUNT BATT TOP
From the MAIN menu, press the soft key to view a
summary of the system’s operation. This information is a sum
of all FlexNet DC data. Press the second soft key to view the
next SUM screen
FX Total 12.6V 99%
Inverting 0.000kW
AC Loads 0.000kW
Buying $ 0.000kW