Monoprice 8744 PoE Wireless Access Point - Manual (Page 5)

5

One Network Cable

Four plastic covers
If any of listed items are missing or damaged, please contact the
www.monoprice.com for replacement immediately.
Chapter 2 Product Installation
You are recommended to install the product after configuring the
settings of MW301A according to the guide in chapter 3. The following
steps take AP mode for example.
1. Use the included power adapter to power on the AP. You can also
use POE power supply or POE switch to power on the AP.
2. Connect one end of the network cable to the LAN port of MW301A,
and another end to your Ethernet broadband, switch or PC.
3. Connect wireless adapter to MW301A.
Please refer to the topology below: