Monoprice 8744 PoE Wireless Access Point User Manual

Page 18

4.1.2.2 P2MP Bridge Mode

The P2MP Bridge Mode which connects scattered wired network

together is more complicated than P2P Bridge mode. P2MP usually

transmit wireless signals from one access point, and other access points

are in charge of receiving signals so as to share network resource.

Support up to 4 remote access point connection. In this mode, wireless

clients are not allowed to connect.

P2MP Bridge mode can connect multiple wireless access point together

without cabling. If “Root AP” is configured as P2MP bridge mode, other

(less than 4) remote access points should select P2P bridge modes. The

topology shows below:

Select WDS P2MP mode in the drop-down box of WDS mode as the

picture below.