Monoprice 8744 PoE Wireless Access Point - Manual (Page 17)

17
Select P2P Bridge in drop-down list of WDS mode as the picture below:
This page includes the AP and WDS parameter setting. AP parameter
setting can change SSID and enable/ disable wireless feature.

AP MAC:
Enter the interconnection equipment’s MAC address.

Channel: Select the channel according to interconnection
equipment’s; the devices on the two ends must be at the same
channel.

Open Scan: Click this button, the AP will scan the nearby wireless
devices automatically and display the information in the table.
Select the device which need
to bridge, the AP will add the device’s
MAC address automatically and select the corresponding channel.