Monoprice 8744 PoE Wireless Access Point - Manual (Page 45)

45
Click
“Next” to enter the WDS security setting and select AP1
corresponding encryption mode. Then enter the encryption key. (We
select TKIP and encryption key 12345678.)
Click
“Next” and save the settings.
After you finished AP2 settings, return to AP1 setting.
Select “Wireless Settings→ Basic Setting” in AP. SSID, channel and
extension channel c
an’t be changed. You only need to enter BSSID：
00:b0:c6:05:4e:dd of AP2 in AP MAC address blank an then save it (You
can also use “Enable Scan to add”). Now all the settings of WDS have
been finished.