Monoprice 8744 PoE Wireless Access Point - Manual (Page 28)

28
WDS security setting provides three encryption modes: WEP encryption,
TKIP encryption and AES encryption.

WEP Key: You can set the WEP key in ASCII code or
Hexadecimal code.

Key: You can choose ASCII code (5 or 13 ASCII codes, illegal
characters like “/” are forbidden) or Hexadecimal characters (10 or
26 Hexadecimal characters).

TKIP/ AES Key: TKIP/AES is an encryption mode based on WPA
and WPA2.

Key: Key characters are ASCII codes from 8 to 63.
Note: The encryption mode and password of each device in the
bridge must be consistent for the connection to be established.
You are recommended to encrypt the bridge to protect the wireless
connection.