Monoprice 8744 PoE Wireless Access Point - Manual (Page 27)

27
Setting Explanation

802.1x WEP
： Click “Enable/Disable” to enable or disable the WEP
algorithm.

Radius Server
：
Enter the IP address of the Radius server.

Radius Server Port
：
Enter the authentication port of the Radius
server. The default is 1812.

Shared Secret
：
Enter the shared key for authentication server
with 8~63 ASCII characters.

Session Timeout
：
The authentication interval period between
AP and authentication server. The default is 3600s.
Note: To improve security level, do not use too easy characters.
4.2.2 WDS Security Setting
WDS Security Setting is to protect the data safety of wireless bridge.
The security setup page of Point to Point Bridge and Point to Multipoint
Bridge is as the picture below.