GReddy TURBO KITS: Nissan 370Z 2009- / twin TD06SH-20G - Manual (Page 20)

―２０―
3 33 3- -- -16 16 16 16 Washer Tank Installation Washer Tank Installation Washer Tank Installation Washer Tank Installation
1) Uninstall the window washer fluid pump from the factory washer tank and reinstall it on to
the provided tank.
2) Mount the window washer fluid tank using provided hardware as shown.
(Parts Used #69～70, 86, 89)
3 33 3- -- -18 18 18 18 Starting the Engine Starting the Engine Starting the Engine Starting the Engine
1. Refill the engine oil to factory spec. We recommend 100% Synthetic GReddy Oil or Mobil 1 Oil.
2. Check all the hoses and wires connection, then reconnect the negative side of the battery.
3. Turn the ignition to “ON” position (engine off) 2-3 times to get fuel pressure. Then, check the
injectors and the fuel rail for any fuel leaks.
* * * * Repair any fuel leaks before starting the engine. Starting the engi Repair any fuel leaks before starting the engine. Starting the engi Repair any fuel leaks before starting the engine. Starting the engi Repair any fuel leaks before starting the engine. Starting the engine with a fuel leak can ne with a fuel leak can ne with a fuel leak can ne with a fuel leak can
cause fire in the engine compartment and can be very dangerous. cause fire in the engine compartment and can be very dangerous. cause fire in the engine compartment and can be very dangerous. cause fire in the engine compartment and can be very dangerous.
4. Remove the ECM fuse and crank the engine to get oil pressure to the turbo, this will prime the
turbos. (Until the oil light on the dash turns off) Check for any oil leaks, then reinstall the fuse
and start the engine.
5. While idling, check for any oil, coolant, or air leeks.