GReddy TURBO KITS: Nissan 370Z 2009- / twin TD06SH-20G User Manual

Page 12

―１２―

Caution!

•

Make sure to check and double check this step. This is the most important st

Make sure to check and double check this step. This is the most important step in this

ep in this

install.

•

Without proper clearance and thermo wrapping the fuel lines, the fuel line connector can

Without proper clearance and thermo wrapping the fuel lines, the fuel line connector can
melt from heat and may catch on fire.

melt from heat and may catch on fire.

•

Wrap the Starter and the Main Engine harness right

Wrap the Starter and the Main Engine harness right
above the transmission bell housing.

above the transmission bell housing.

Important!

Make sure that the main engine harness is properly
wrapped and secured away from the manifold and the
wastegate when they are installed.

Caution!

Without proper clearance and thermo wrapping the
harness, it melt and cause a short in the electrical
system or may catch on fire.

-2

2 Water Line Suction Connector

Water Line Suction Connector

Water Line Suction Connector Installation

Installation

1. Remove the factory water tube and Install the water

line suction connector.

2. Cut the Acryl hose 15Φ to 310mm and Install it

between the Suction connector and the water tube.

(Parts used #44, 60, 73)

-3

3 Modification the

Modification the

Modification the Engine Mount

Engine Mount

1. Remove the Engine Mount, and Shave the

Engine Mount as shown in the marked area.

2. Re Install the Engine Mount.

Water Line Suction

Connector

6mm

Grind Down

15mm