GReddy TURBO KITS: Nissan 240SX 1995-98 / TD06-20G - Manual (Page 8)

2. Removal of Stock Parts
When removing the stock parts, make sure you read over the
factory repair manual for proper procedures.
2-1 Disconnect the negative terminal of the battery.
2-2 Drain the engine oil and power steering fluid.
2-2 Disconnect the air flow meter.
2-4 Remove the Air cleaner assembly with airflow meter, intake tube, breather hose
and Intake temperature sensor.
2-5 Disconnect the primary and secondary O2 sensor and remover the catalytic
converter.
2-6 Remove the exhaust manifold.
2-7 Remove oil pan (Please refer to the factory service manual for detail instructions
for removing the oil pan.)
2-8 Remove the fuel rail assembly with injectors and regulator.