GReddy TURBO KITS: Nissan 240SX 1995-98 / TD06-20G - Manual (Page 13)

3-9 Catalytic Converter Installation
1. Install the factory catalytic converter to
the down pipe.
3-10 Heatshield Installation
1. Install the heat shield to the
turbocharger as shown.
(Parts used #34, 45, 36, 50, 50)
3-11 Compression Pipe Installation
1. Install C-1, C-2 to turbo out let.
(Parts used #4, 5, 22, 29, 51, 52)
2. Install C-3 from C-2 to throttle body in
let. Secure the pipe to the radiator fan
shroud as shown.
(Parts used #6, 20, 24, 25, 27, 29, 30, 31)
3. Install the vacuum line for the actuator
with a 3way tee from the fuel pressure
regulator to the actuator.
(Parts used #19, 43)