GReddy TURBO KITS: Scion xB 2003-05 / TF03-14G - Manual (Page 12)

ＫＩＴﾋｰﾄｲﾝｼｭﾚｰﾀｰ№２ ＫＩＴﾋｰﾄｲﾝｼｭﾚｰﾀｰ№２ ＫＩＴﾋｰﾄｲﾝｼｭﾚｰﾀｰ№２ ＫＩＴﾋｰﾄｲﾝｼｭﾚｰﾀｰ№２
ＫＩＴﾋｰﾄｲﾝｼｭﾚｰﾀｰ№１ ＫＩＴﾋｰﾄｲﾝｼｭﾚｰﾀｰ№１ ＫＩＴﾋｰﾄｲﾝｼｭﾚｰﾀｰ№１ ＫＩＴﾋｰﾄｲﾝｼｭﾚｰﾀｰ№１
ＫＩＴフロントチューブ ＫＩＴフロントチューブ ＫＩＴフロントチューブ ＫＩＴフロントチューブ
Ａ Ａ Ａ Ａ
3 33 3－ － － －9 99 9 Down Pipe Installation Down Pipe Installation Down Pipe Installation Down Pipe Installation
(1) Install gasket on the catalytic converter end
of the down pipe.
〈Parts№3，27〉
(2) Install stock O2 sensor on the down pipe.
(3) Install the down pipe to the turbo using
provided gasket and hardware. Use the
provided M10X80mm bolt for location “A.”
(4) Reinstall the catalytic converter and reconnect the
o2 sensor connectors.
*Reuse factory hardware to bolt the cat back on
〈Parts№24，44，45，46〉
3 33 3－ － － －1 11 10 00 0 Heat Shield Heat Shield Heat Shield Heat Shield No1.2 No1.2 No1.2 No1.2 Installa Installa Installa Installation tion tion tion
(1)Install the down pipe heat shield No2 on to the
down pipe using the provided M6 x 10mm bolts
and reinstall the stock charcoal canister. 〔 3 33 3- -- -2 2 2 2
(2) (2) (2) (2)〕
〈Parts№29，40〉
(2)Install the turbine housing heat shield No1 on to
the turbo using the provided bolts as shown.
〈Parts№28，41〉
Down pipe Down pipe Down pipe Down pipe
Heat shield No2
Heat shield No1
A A A A M10 M10 M10 M10Ч Ч Ч Ч80mm 80mm 80mm 80mm