GReddy TURBO KITS: Scion xB 2003-05 / TF03-14G - Manual (Page 11)

ＫＩＴｵｲﾙﾘﾀｰﾝﾎｰｽ ＫＩＴｵｲﾙﾘﾀｰﾝﾎｰｽ ＫＩＴｵｲﾙﾘﾀｰﾝﾎｰｽ ＫＩＴｵｲﾙﾘﾀｰﾝﾎｰｽ
ＫＩＴｵｲﾙﾌﾟﾚｯｼｬｰﾎｰｽ ＫＩＴｵｲﾙﾌﾟﾚｯｼｬｰﾎｰｽ ＫＩＴｵｲﾙﾌﾟﾚｯｼｬｰﾎｰｽ ＫＩＴｵｲﾙﾌﾟﾚｯｼｬｰﾎｰｽ
(2)Install the three stud bolts on to the turbine housing
as shown.
〈Parts №44〉
(3)Install the stud bolts on to the exhaust manifold,
then mount the turbocharger to the manifold with
compressor housing on the passenger side Using
provided hardware and gasket.
3 33 3－ － － －7 77 7 Oil Pressure Line Connection Oil Pressure Line Connection Oil Pressure Line Connection Oil Pressure Line Connection
(1) Connect the oil pressure line that was installed in
step 3-5(3) to the turbo using banjo fitting and
copper washers. As shown.
*Secure the oil pressure line to the engine
mount and alternator bracket using provided
zip ties.
〈Parts №８，９，３２〉
3 33 3－ － － －8 88 8 Oil Return Installation Oil Return Installation Oil Return Installation Oil Return Installation
Wrap the provided 16φhose with thermo cloth.
Then Install the hose to connect the oil return pipe
from the turbo to the oil pan.
〈Parts №15，21，31〉
Oil pressure line
Oil return hose