beautypg.com

Triggers, ir, and rs-232, Setup menu, Continued – Anthem AVM 30 User Manual

Page 42

background image

34

3. SETUP MENU

continued …

3.9

TRIGGERS / IR / RS-232

When a trigger output on the AVM 30 is connected to the trigger input of another component, such as a
power amplifier or video projector, the AVM 30 can turn the component on or off according to the trigger’s
Setup. For components that do not use triggers, a triggerable power bar may work (see your dealer).

• Trigger1 and Trigger2: Provide standard trigger output of 12 volts with up to 50 mA of current,

suitable for typical source components and most amplifiers.

• Trigger3: Provides an output of 12 volts with up to 200 mA of current, suitable for triggers on

motorized projection equipment and very high power amplifiers.

There is a quarter of a second delay between each trigger to minimize momentary line voltage drops caused
by switching on too many devices at the same time.

All Triggers:
When on ‘Disabled’ all triggers remain off. When on ‘Enabled’ the trigger chart below is used to set
conditions. For custom installations, ‘RS-232 Ctrl’ uses external control over all triggers.

Set Trigger:
Highlighting ‘b. SET TRIGGER 1’ and then pressing SELECT displays this menu – in the example shown,
TRIGGER 1 activates whenever MAIN power is turned on:

Under each of the four Paths, MAIN, ZONE2 (Z2), ZONE3 (Z3), and RECORD (REC), notice that there are 40
available Sources (40 dashes) that could be used to activate the trigger. After highlighting POWER ON or a
Source, press SELECT and use the

buttons to move from one Path to another, and then to set the trigger

to activate, use the

buttons to change the ‘’ to a ‘*’ (be sure ALL TRIGGERS is set to ‘Enabled’).

9.

TRIGGERS / IR / RS-232

a.

ALL TRIGGERS : Disabled

b.

SET TRIGGER 1

c.

SET TRIGGER 2

d.

SET TRIGGER 3

e. SET

IR-INPUTS

f. BAUD

RATE :

19200

g. FLOW

CONTROL :

None

h.

RS-232 TX STATUS : Off

10b. SET TRIG-1 SOURCES - 50mA

MAIN Z2 Z3

REC

a.

POWER ON :

*

b.

CD

:

c.

2-Ch

:

d.

6-Ch

:

e.

TAPE

:

f.

FM/AM

:

g.

DVD

:

h.

TV

:

i.

SAT

:

j.

VCR

:

k.

AUX

: