Setup menu, Continued – Anthem AVM 30 User Manual

Page 34

Text mode
Original mode

Procedure for Manual Test Sequence:

• Enter the Setup Menu. Go to ‘4. SPEAKER LVL CALIBRATION’ and press SELECT.

• Press the

buttons to go from speaker to speaker.

• As each speaker plays, use the

buttons to adjust its loudness relative to other speakers.

• Press BACK to stop the test tone.

Procedure for Auto Test Sequence:

• Enter the Setup Menu. Go to ‘4. SPEAKER LVL CALIBRATION’ and press SELECT.

• Use the

buttons to set TEST SEQUENCE to ‘Auto’.

• Press SELECT to start the automatic sequence.

• As each speaker plays, use the

buttons to adjust its loudness relative to other speakers. Once

set, the sequence will automatically advance to the next speaker for adjustment. It will then
continue to cycle speaker by speaker to allow you to fine tune all levels.

• Press BACK to stop the test tone.

3. SETUP MENU

continued …