Anthem AVM 30 - Manual (Page 35)

27
3.5 SOURCE SETUP / PRESETS
These are the menus where you set up how you want each input to be used.
If you want MAIN to always be copied to another Path (see section 4.3), change ‘Manual’ to ‘Always’. This
is recommended if you want a Source that only has digital audio output to be used in ZONE2, ZONE3, or REC,
or if you want MAIN and another Path to always play the same Source. ‘Always’ setting is not recommended
if you want Source selection to be independent – in this case, see the highlighted part of section 2.2.
For the following example, highlighting ‘f. DVD’ in menu 5 and then pressing SELECT displays this menu:
The submenus for the other Sources are identical or similar to this one.
3. SETUP MENU
continued …
5. SOURCE SETUP / PRESETS
a. CD
b. 2-Ch
c. 6-Ch
d. TAPE
e. FM/AM
f. DVD
g. TV
h. SAT
i. VCR
j. AUX
k. COPY MAIN->ZONE2: Manual
l. COPY MAIN->ZONE3: Manual
m. COPY MAIN->REC
: Manual
5f. DVD SETUP / PRESETS
a. RENAME : DVD
b. AUDIO IN : Dig RCA DVD
c. MUTING : Med
d. EQ : LF +0.0 dB HF +0.0 dB
e. SPEAKER CONFIG : Cinema
f. COMPONENT VIDEO : Comp1
g. COMPONENT VIDEO : Comp1
h. COMPONENT VIDEO : Comp1
i. LIP-SYNC DELAY : 0.0 ms
- - - - - - - MODE PRESETS - - - - - - -
j.
2.0 : AnthemLogic-Cin
k. 2.0-Sur : PLIIx Movie
l. DD-5.1 : PLIIx Movie
m. DD-EX : PLIIx Movie
n. DTS-5.1 : Neo:6
o. DTS-ES : DTS-ES Matrix