Quarterly – Alliance Laundry Systems HC18PC2 User Manual

Page 22

Maintenance

F232137

4. Remove back panel, and check overflow hose

and drain hose for leaks.

5. Unlock the hinged lid, and check the supply

dispenser hoses and hose connections.

6. Clean inlet hose filter screens:

a. Turn water off and allow valve to cool, if

necessary.

b. Unscrew inlet hose and remove filter screen.

c. Clean with soapy water and reinstall. Replace

if worn or damaged.

7. Tighten motor mounting bolt locknuts and

bearing bolt locknuts, if necessary.

8. Use compressed air to clean lint from motor.

9. Clean interior of machine, both basket and shell,

by wiping with a water-soaked sponge or cloth.

10. Use compressed air to ensure that all electrical

components are free of moisture and dust.

11. Verify the insulation is intact on all external wires

and that all connections are secure. If bare wire is
evident, call a service technician.

12. For variable-speed models only, clean AC drive

cooling fan blades monthly (more often if
required by the condition of the air).

a. Open the top cover and remove the control

module cover.

b. Gently wipe the fan blades clean with a dry

cloth.

Quarterly

NOTE: Disconnect power to the machine at its
source before performing the quarterly
maintenance procedures.

1. Tighten door hinges and fasteners, if necessary.

2. Using a Teflon-based spray lube, lubricate the

door lock by applying the spray to the door lock
pin while turning the door handle.

3. Tighten anchor bolts, if necessary.

4. Verify that the drain motor shield is in place and

secure.

5. Check all painted surfaces for exposed metal.

(Matching paint is available from the
manufacturer.)

●

If bare metal is showing, paint with primer or
solvent-based paint.

●

If rust appears, remove it with sandpaper or by
chemical means and paint with primer or
solvent-based paint.

This manual is related to the following products: