Alliance Laundry Systems HC18PC2 - Manual (Page 12)

Operation
F232137 10 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Display Indications
The following table lists the various displays and what
they mean. The operator should become familiar with
these computer displays.
(
Display Indications for P-Series – Coin
Display Meaning Display Meaning
Cn20 Program identification code (ROM) HILE High water level
Hold Wait...power has just been turned on SLUC* Overflow fill
CY Cycle (followed by two-digit number) nobL No Bleach selected
PUSH Select cycle bL Bleach selected
FILL Fill step nSUP No supply selected
bLCH Add bleach SUP Supply selected
StOP Stop routine SUP1 Supply 1
SdLY* Spin coast delay SUP2 Supply 2
donE Cycle and stop routine have ended SUP3 Supply 3
PrE Prewash segment (1st of 6 segments) PrO Programming Mode
UASH Wash segment (2nd of 6 segments) tESt Test mode selected
rin1 First rinse (3rd of 6 segments) norN Run mode selected
rin2 Second rinse (4th of 6 segments) FrEE Vend price disabled
rin3 Third rinse (5th of 6 segments) PAY Vend price enabled
rin4 Fourth rinse (6th of 6 segments) CoiL Coin-blocking coil enabled
CFIL Cold fill S3 Supply 3 enabled
bFIL Warm fill (both hot and cold) 1AtS All 4 cycles share same vend price
HFIL Hot fill 4AtS Vend price may be set for individual cycles
LOLE Low water level Coin/dEno** Set value assigned each coin
SPIn/tINE** Reads “SPIn” for one second, then
“tINE” followed by time for spin dOOr Door not properly closed
* Machines shipped to France only.
** Display indications separated by a slash represent an alternating display.
Table 2