Alliance Laundry Systems HC18PC2 - Manual (Page 17)

Operation
15 F232137 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5. Add liquid and/or powder supplies to supply
dispenser. Refer to Figure 7.
a. Add detergent to container 1.
b. Add softener to container 3.
For non-coin models: Liquid supplies may be
injected directly into the supply dispenser by an
external chemical supply dispenser. Refer to
Installation and Programming Manuals.
6. Press the Up or Down key to select wash cycle.
Press the Start key. Refer to Figure 8.
Figure 7
7. For coin models: Insert required number of coins
to start machines. Refer to Figure 7.
8. For non-coin models: Press the Start key.
Refer to Figure 8.
Figure 8
9. When applicable, add bleach to container 2
when the display reads “bLCH”. Refer to
Figure 9.
Figure 9
NOTE: To stop a cycle at any time, press the Stop
(non-coin models only) key.
NOTE: To display the temperature of the water
while a cycle is running, press the Up key. To
display the number of the cycle in progress, press
the Start key.
B157R
1 Detergent
2 Bleach
3 Softener
To avoid personal injury, recommended
inlet water temperature should be no
higher than 125° Fahrenheit (51° Celsius).
W709
WARNING
B157R
1
2
3
U137R
CHM2221N
CYCLE SELECTION
UP DOWN START STOP
CYCLE SELECTION
UP DOWN START STOP