Alliance Laundry Systems HC18PC2 User Manual
Page 21
Maintenance
19
F232137
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 12
3. For 80 pound capacity models only, lubricate
bearings and seals each month OR after every
200 hours of operation. Refer to Figure 12.
a. Use a premium-grade lithium-based #2
grease. Never mix two types of grease, such
as petroleum and silicone.
b. Pump the grease gun slowly, permitting only
the following number of strokes:
●
Bearing grease fitting, two strokes
●
Seal grease fitting, one stroke
NOTE: Do not pump the grease gun until grease
comes out of the bearing housing. This can result in
overlubrication, causing damage to bearings and
seals.
H047I
1
Bearing Grease Fitting
2
Seal Grease Fitting
H047I
1
2