Alliance Laundry Systems HC18PC2 - Manual (Page 10)

F232137 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
Control Panel
Figure 2 shows the control panel for S, P and
V-computer machines.
Figure 2
The Up and Down keys are used in cycle
selection. Press these keys to move among cycles from
smaller to greater, or greater to smaller.
The Start key is used to start a cycle.
The Stop key is not active in normal RUN
Mode. In RUN Mode it is used only for stopping test
cycle.
The LED display informs operator of various
functions throughout operation of machine. Refer to
tables on the following pages for displays and their
meanings. Indicator lights in LED display indicate
out-of-balance conditions and water levels. Refer to
Figure 2.
B161R
1 Out-of-Balance Condition for VCV, VXV
2 High Water Level
3 Medium Water Level for V-Series
4 Low Water Level
5 LED Display
6 Keys for Standard OPL
7 Keys for Icon OPL
8 Keys for VC2, VCV, VX2, VXV
Up Down Start Stop
B161R
1
2
3
4
5
6
8 7