Telenav for Sprint Supported Devices: v5.8 for Android devices - Manual (Page 30)

 Street - The street or highway name of the road segment.
 Mph/Kph - Average speed on that road segment.
NOTE: “N/A” is displayed for segments without traffic flow information (usually local streets) or segments farther
than 200 miles away.
If you select an incident line, you can view the details. Below is an explanation of
what you will see on the Traffic Detail screen:
 Delay - The additional time it will take to travel the segment as
compared with the time it would take if traveling at the posted speed.
 Travel Time - Estimated time it will take to travel the segment.
 Slowest Speed - Slowest speed observed on the segment.
 Average Speed Bar - Average speed of a segment on a scale of 0
to the maximum-posted speed for that segment.
 Incident Detail - Each incident is displayed with the following:
o Incident icon color-coded by severity
o Location
o Additional comments
NOTE: If there is no flow information for a segment, the Average Speed bar on the Details page is grayed out.
Nav Mode
Nav Mode allows you to change the navigation view between 2D Moving Maps,
3D Moving Maps, and Turn Icons.
The default navigation view is 3D moving maps, but you may wish to use the 2D
Map instead.
© 2010 TeleNav, Inc. Page 30 of 71