ididit Cable Shift Linkage Kit: Ford Column to Ford AOD Transmission - Manual (Page 5)

7. Install the throttle lever (2) onto its shaft and tighten the nut. Be sure
the linkage is in its original position. Install the detent spring and its
bolt. Check that the throttle lever (2) moves freely and that it pushes
in the throttle valve on the valve body. Check that the shift lever (1)
moves through all its positions and the park operating rod (8) moves
with it.
8. Replace the oil filter. We recommend that you use a new filter unless
the vehicle has very low mileage. Replace the oil pan gasket with a
new gasket. Reinstall the original bolts except for the two that secure
the cable bracket. The cable bracket (9) is installed with the supplied
longer bolts with spacers (10) between the bracket and the flange on
the pan. Tighten the oil pan bolts to 12-16ft-lbs
9. Fill the transmission with 6 quarts of transmission fluid.
4