ididit Retrofit Steering Column: 1968-69 Mustang - Manual (Page 7)

5
Underdash Mount:
Slide the column through your underdash
mount before securing it to the dash. Line
the column with the groove from the mount-
ing prongs and screw the nuts on the mount.
These mounting prongs will stop the the col-
umn from rotating like Ford engineered it to.
Do not tighten fully just yet we want to make
sure the column will align later. Raise the
column to the dash and hand tighten the bolts
into the dash. Once your column is adjusted
perfectly to where your are comfortable with
the installation, tighten the nuts snug to the
column. Now you can tighten the underdash
mounting bolts to 108-156inch lbs.
1968 Underdash Mount Installation:
1969 Underdash Mount Installation:
1968 Mustang
Underdash Mount
1969 Mustang
Underdash Mount