Alpine VPA-B222R - Manual (Page 8)

7
-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
Adjusting the Volume
Turn the flipper switch clockwise or counterclockwise
to adjust the volume.
Clockwise: Volume up
Counterclockwise: Volume down
Volume: 0 - 35
Lowering Volume Quickly
Activating this function will instantly lower the volume level.
• This operation can be performed from either a monitor compatible
with touch panel or remote control (sold separately). For operation
from a remote control (sold separately), refer to the owner's manual
of the remote control.
Touch [MUTE] on the main source screen to activate the
MUTE mode.
The audio level decreases.
During mute, the volume level indicator will blink.
Screen example
Touching [MUTE] again brings the audio back to its previous
level.
Band display
Preset number display
Frequency display
Listening to Radio
1
Press SOURCE/POWER.
The source selection screen is displayed.
2
Press the joystick up or down to select RADIO, then
press
/ /ENTER.
3
Press and hold for at least 2 seconds repeatedly
until the desired radio band is displayed.
FM-1 FM-2 FM-3 MW LW FM-1
4
Press / /ENTER to select the tuning mode.
• The initial mode is Distance mode.
DX SEEK (Distance mode):
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
SEEK (Local mode):
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
OFF (Manual mode):
The frequency is manually tuned in steps (Manual tuning).
5
Press or to tune in the desired station.
Holding down or will change the frequency
continuously.
MUTE
Radio
DX SEEK SEEK (OFF) DX SEEK
Joystick
01GB00VPAB222R.book Page 7 Monday, January 23, 2006 4:24 AM