Alpine VPA-B222R - Manual (Page 16)

15
-EN
01GB05VPAB222R.fm
ALPINE VPA-B222R 68-02065Z87-A (EN)
When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
Setting item: RDS CLK DISP
Setting content: OFF / ON
If the difference in volume level between the CD and FM radio is too
great, adjust the FM signal level as follows.
Setting item: FM LEVEL
Setting content: LOW / HIGH
Setting item: PI SEEK
Setting content: OFF / AUTO
When ON is selected, the unit automatically keeps receiving the related
local RDS station.
Setting item: RDS REGIONAL
Setting content: OFF / ON
You can select one of the patterns of the display languages.
Setting item: PTY LANGUAGE
Setting content: GB / NL / F / D / I / E
Two types of font can be selected.
Setting item: LANGUAGE SEL
Setting content: MODE1 / MODE2
System Setup Operation
1
Press and hold TA/RTN/SETUP for at least 2
seconds.
The SETUP screen is displayed.
2
Press the joystick up or down to select SYSTEM
SETUP, then press the joystick right.
The SYSTEM SETUP screen is displayed.
SYSTEM SETUP Screen example
RDS Time Display
ON: Adjust the clock automatically based on the time data. In
this case, the clock cannot be adjusted manually.
To adjust it manually, select OFF.
Adjusting Source Signal Levels
PI SEEK Setting
Receiving RDS Regional (Local) Stations
Switching the Display Language of PTY
(Programme Type)
Switching to the Russian Font
MODE1: Normal Font Display (ISO8859-1)
MODE2: Russian Font Display (WINDOWS-1251)
You cannot use this font for display in RDS, Tuner
mode.
SYSTEM Setup
The Parking Brake must be engaged to access the SETUP
mode screen. Attempting to access this screen while driving
will display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 5 are common operations to each
“Setting item” of SYSTEM Setup. Refer to each section for
details.
01GB00VPAB222R.book Page 15 Monday, January 23, 2006 4:24 AM