Asus MOTHERBOARD P5N64 WS - Manual (Page 87)

ASUS P5N64 WS Professional 4-19
Command Per Clock (CMD) [Auto]
Configuration options: [Auto] [1T] [2T]
tRRD [Auto]
Configuration options: [Auto] [1] [2] - [14] [15]
tRC [Auto]
Configuration options: [Auto] [1] [2] - [62] [63]
tWR [Auto]
Configuration options: [Auto] [1] [2] - [14] [15]
tWTR [Auto]
Configuration options: [Auto] [1] [2] - [30] [31]
tREF [Auto]
Configuration options: [Auto] [7.8uS] [3.9uS]
tFAW [Auto]
Configuration options: [Auto] [1] [2] - [62] [63]
CPU Spread Spectrum [Auto]
Set to [Disabled] to enhance CPU overclocking ability or [Auto] for EMI control.
Configuration options: [Disabled] [Auto]
NB/SB PCIE Spread Spectrum [Auto]
Set to [Disabled] to enhance PCIE overclocking ability or [Auto] for EMI control.
Configuration options: [Auto] [Disabled]
The following five items are adjusted by typing the desired values using the
numeric keypad and press the key. You can also use the <+> and <->
keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the key.
CPU Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 0.85000V to
1.80000V with a 0.00625V interval.
Refer to the CPU documentation before setting the CPU Voltage. Setting a
high voltage may damage the CPU permanently, and setting a low voltage may
make the system unstable.
FSB Termination Voltage [Auto]
Allows you to set the front side bus termination voltage. The values range from
1.20V to 2.46V with a 0.02V interval.
The minimum and standard value becomes [1.10V] when you install a 45nm
CPU.