Asus MOTHERBOARD P5N64 WS - Manual (Page 54)

2-28 Chapter 2: Hardware information
5. USB connector (10-1 pin USB 910)
This connector is for USB 2.0 ports. Connect the USB module cable to
this connector, then install the module to a slot opening at the back of the
system chassis. This USB connector complies with USB 2.0 specification that
supports up to 480 Mbps connection speed.
You can connect the USB cable to ASUS Q-Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard.
Never connect a 1394 cable to the USB connector. Doing so will damage the
motherboard!
P5N64 WS PRO
PIN 1
USB+5V USB_P10- USB_P10+ GN
D
NC
USB+5V USB_P9- USB_P9+
GN
D
USB910
P5N64 WS Professional USB2.0 connector
6. IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for an IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage
the motherboard!
You can connect the 1394 cable to ASUS Q-Connector (1394, red) first, and
then install the Q-Connector (1394) to the 1394 connector onboard.
P5N64 WS PRO
PIN 1
TPA2- GND TPB2- +12V GND
TPA2+
GND
TPB2+
+12V
IE1394_2
P5N64 WS Professional IEEE 1394 connector