beautypg.com

P5n64 ws professional atx power connectors – Asus MOTHERBOARD P5N64 WS User Manual

Page 58

background image

2-32

Chapter 2: Hardware information

• For a fully configured system, we recommend that you use a power supply

unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version)

and provides a minimum power of 400 W.

• Do not forget to connect the 8-pin EATX12V power plug; otherwise, the

system will not boot.

• Use of a PSU with a higher power output is recommended when

configuring a system with more power-consuming devices. The system

may become unstable or may not boot up if the power is inadequate.

• If you want to use two high-end PCI Express x16 cards, use a PSU with

500W to 600W power or above to ensure the system stability.

• If you are uncertain about the minimum power supply requirement for your

system, refer to the Recommended Power Supply Wattage Calculator

at http://support.asus.com/PowerSupplyCalculator/PSCalculator.

aspx?SLanguage=en-us for details.

13. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)

These connectors are for ATX power supply plugs. The power supply plugs

are designed to fit these connectors in only one orientation. Find the proper

orientation and push down firmly until the connectors completely fit.

P5N64 WS PRO

EATXPWR

PIN 1

GND
+5 Volts
+5 Volts
+5 Volts
-5 Volts
GND
GND
GND
PSON#
GND
-12 Volts
+3 Volts

+3 Volts

+12 Volts
+12 Volts

+5V Standby

Power OK

GND

+5 Volts

GND

+5 Volts

GND

+3 Volts
+3 Volts

EATX12V

PIN 1

+12V DC

+12V DC

+12V DC

+12V DC

GND

GND

GND

GND

P5N64 WS Professional ATX power connectors

This manual is related to the following products: