Software upgrade, Firmware upgrade, Maintenance – Boonton The New 55 Series Wideband USB Power Sensor User Manual
Page 23
55 Series Wideband USB Sensor
Page 23 of 28
12
Software Upgrade
All future updates on Boonton Peak Power Analyzer software will be available and can be downloaded
from Boonton product page under the section "Manual and Software":
Instruction to update the software:
(1) Download the latest release of the software from the above link and save it to your local drive of
your computer
(2) Now follow the regular installation procedure as described on section-6 in order to update the
software
13
Firmware Upgrade
Device firmware has been loaded into the 55 Series USB Power sensor at the factory. This consists of the
proprietary System software and the 55 Series Application Firmware. The Application Firmware for the device will
be updated from time to time to correct errors and add new features. Users can upgrade their firmware by
downloading a special Firmware Upgrade package with instruction from the Boonton Electronics official webpage,
NOTE: See the instructions with firmware update package once you download it from Boonton website.
14
Maintenance
This section presents procedures for maintaining the 55 series Wideband USB Power sensors.
Safety:
Although the 55 Series has been designed in accordance with international safety standards, general safety
precautions must be observed during all phases of operation and maintenance. Failure to comply with the
precautions listed in the Safety Summary located in the front of this manual could result in serious injury or
performance issues. Service and adjustments should be performed only by qualified service personnel
Cleaning:
Painted surfaces can be cleaned very carefully with a mild cleaning solution.
CAUTION
: When cleaning the USB power sensor, do not allow cleaning fluid to enter into the device. Avoid using
chemical cleaning agents which can damage painted or plastic surfaces.