Ashland I-155XL2 Ver 8-2006 - Manual (Page 18)

8
ITEM PART ITEM DESCRIPTION
1 A125050-01 Rod 1-3/4” with welded eye
2 A125050-02 Piston
3 A125050-03 Gland, Threaded
4 A125050-04 Lock Nut, 1-1/8” NF
5 A125050-05 Seal Kit, a-f
A125050-05a Nylon Wear Ring
A125050-05b FSP Seal
A125050-05c O-Ring
A125050-05d Backup Washer
A125050-05e Hallite Rod Seal
A125050-05f Snap-in Rod Wiper
6 A123351 Bushing, Retaining Flange 9/16 ID x 3/4 OD, 3/4 Lg.
7 AFB-00015 HHCS 1/2”NC x 1-1/2” Bolt, Gr. 8
8 A123362 Pin, 1-1/2” with slot for keeper bushing
9 A123363 Pin: 1-1/2” square head
10 8602 Pin, Cotter1/4” x 2” Zinc
**If you have 3 capscrew headcap refer to the next page.
1* OLD STYLE
The older apron cylinder can
be identified by 3/8” NPT ports
& 3 bolts on the headcap of
the gland.
2* NEW STYLE
The new style, effective
6/25/03, has 7/8” o-ring base
ports & the gland is threaded
into I.D. of the barrel. Identi-
fied by the 2 holes on the end
of the cylinder.
APRON CYLINDER 4”x13”
Part #A125050 s.n. 20750 and above
effective 06/03