American Fibertek SMH10p-PoE - Manual (Page 98)

89
6.20 SNMP Configuration
Simple Network Management Protocol (SNMP) is the protocol developed to manage
nodes (servers, workstations, routers, switches and hubs etc.) on an IP network. SNMP
enables network administrators to manage network performance, find and solve network
problems, and plan for network growth. Network management systems learn of
problems by receiving traps or change notices from network devices implementing
SNMP.
6.20.1 System Configuration
 Community Strings
Here you can define the new community string set and remove the unwanted community
string.
 String: Fill the name string.
 RO: Read only. Enables requests accompanied by this community string to
display MIB-object information.
 RW: Read/write. Enables requests accompanied by this community string to
display MIB-object information and to set MIB objects.
 Click Add .
 To remove the community string, select the community string that you defined
before and click Remove . The strings of Public_RO and Private_RW are default
strings. You can remove them but after resetting the switch to default, the two
strings show up again.
 Agent Mode: Select the SNMP version that you want to use it. And then click
Change to switch to the selected SNMP version mode.