American Fibertek SMH10p-PoE - Manual (Page 151)

142
[number] max request global
configuration
command to set the
MAX requests.
maxrequest 3
8021x misc
reauthperiod [sec.]
G Use the 802.1x misc
reauth period global
configuration
command to set the
reauth period.
switch(config)# 8021x misc
reauthperiod 3000
8021x portstate
[disable | reject | accept
| authorize]
I Use the 802.1x port
state interface
configuration
command to set the
state of the selected
port.
switch(config)#interface
fastethernet 3
switch(config-if)#8021x portstate
accept
show 8021x E Displays a summary of
the 802.1x properties
and also the port
sates.
switch>show 8021x
no 8021x G Disable 802.1x
function
switch(config)#no 8021x
TFTP Commands Set
Netstar Commands Level Description Defaults Example
backup
flash:backup_cfg
G Save configuration to
TFTP and need to
specify the IP of TFTP
server and the file name
of image.
switch(config)#backup
flash:backup_cfg
restore
flash:restore_cfg
G Get configuration from
TFTP server and need to
specify the IP of TFTP
switch(config)#restore
flash:restore_cfg