American Fibertek SMH10p-PoE - Manual (Page 100)

91
6.20.2 Trap Configuration
A trap manager is a management station that receives the trap messages generated by
the switch. If no trap manager is defined, no traps will be issued. To define a
management station as a trap manager, assign an IP address, enter the SNMP
community strings, and select the SNMP trap version.
 IP Address: Enter the IP address of the trap manager.
 Community: Enter the community string for the trap station.
 Trap Version: Select the SNMP trap version type—v1 or v2c.
 Click Add .
 To remove the community string, select the community string listed in the current
managers field and click Remove .
Trap Managers interface