American Fibertek SMH10p-PoE - Manual (Page 83)

74
6.17 Rate Limiting
You can set up every port’s bandwidth rate and frame limitation type.
 Ingress Limit Frame type: select the frame type that wants to filter. There are four
frame types for selecting:
 All
 Broadcast/Multicast/Flooded Unicast
 Broadcast/Multicast
 Broadcast only
Broadcast/Multicast/Flooded Unicast, Broadcast/Multicast and Bbroadcast
only types are only for ingress frames. The egress rate only supports All type.
Rate Limiting interface
 All the ports support port ingress and egress rate control. For example, assume port
1 is 10Mbps, users can set it’s effective egress rate is 1Mbps, ingress rate is
500Kbps. The switch performs the ingress rate by packet counter to meet the
specified rate