American Fibertek SMH10p-PoE - Manual (Page 122)

113
6.27 Power over Ethernet
This segment shows the Power over Ethernet function.
PoE Status
 Maximum Power Available: Displays the maximum power supply in Watt.
 Actual Power Consumption: This column shows the real-time total power
consumption.
 System Power Limit: User can modify the value to this column field to limit the total
output power for the system.
 Main Supply Voltage: This column shows the output voltage of the system for PoE
ports.
 Firmware Version: This column shows the PoE chip’s firmware version.
 Port Knockoff Disabled: Power Management state where one or more PDs have
been powered down so that a higher priority PD may be powered up and yet not
exceed the maximum total power available for PDs.
 AC Disconnect: Tick this checkbox to monitor the AC impedance on the port
terminals and removes power when the impedance rises above a certain value, for