American Fibertek SMH10p-PoE - Manual (Page 149)

140
monitor tx [Port ID] G Set TX destination
port of monitor
function
switch(config)#monitor tx 3
show monitor P Show port monitor
information
switch#show monitor
show monitor I Show port monitor
information
switch(config)#interface
fastEthernet 2
switch(config-if)#show monitor
no monitor I Disable source port of
monitor function
switch(config)#interface
fastEthernet 2
switch(config-if)#no monitor
802.1x Commands Set
Netstar Commands Level Description Example
8021x enable G Use the 802.1x global
configuration
command to enable
802.1x protocols.
switch(config)# 8021x enable
8021x system radiusip
[IP address]
G Use the 802.1x
system radius IP
global configuration
command to change
the radius server IP.
switch(config)# 8021x system
radiusip 192.168.1.1
8021x system serverport
[port ID]
G Use the 802.1x
system server port
global configuration
command to change
the radius server port
switch(config)# 8021x system
serverport 1812
8021x system
accountport
[port ID]
G Use the 802.1x
system account port
global configuration
command to change
switch(config)# 8021x system
accountport 1813