American Fibertek SMH10p-PoE - Manual (Page 115)

106
6.25.2 Port Configuration
You can configure the 802.1x authentication state for each port. The state provides
Disable, Accept, Reject, and Authorize.
 Reject: The specified port is required to be held in the unauthorized state.
 Accept: The specified port is required to be held in the authorized state.
 Authorize: The specified port is set to the Authorized or Unauthorized state in
accordance with the outcome of an authentication exchange between the
Supplicant and the authentication server.
 Disable: When disabled, the specified port works without complying with 802.1x
protocol.
 Click
Apply .
802.1x Per Port Setting interface