beautypg.com

2 turning scanning on and off – APC AP9268 User Manual

Page 35

background image

APC KVM Switch Installer/User Guide

30

From the OSD menu.

1. From the main OSD Window, press the Control key twice to access the

Command Menu.

2. Toggle ‘Scanning is OFF’, ‘Scanning by Name’, ‘Scanning by Address’

or ‘Scanning by List’ from the menu. This is a toggle option - only one
scanning option will show on the menu at any one time.

Selecting ‘by Name’ will scan channels alphanumerically by name, ‘by

Address’ will scan channels numerically by channel address.

3. Press Enter.

With the Scan Button

1. You may initiate scanning by address by pressing and holding the Scan

push-button until the SCAN LED lights green.

2. Scanning may be halted if a channel is selected, or if the Scan push-button

is pressed again.

By keyboard hot-key sequence

The following key sequences control scanning.

Key Sequence Action

SG Enables the scan Go command. (By Address Only)

SH Enables the scan Halt command.

6.2 Turning Scanning On and Off