3 the command menu – APC AP9268 User Manual
Page 21
APC KVM Switch Installer/User Guide
16
APC KVM Switch
Configure Channel
Add Channel
ENTER-accept
ESC-previous
Change ChannelAddress
Options For ID window
Dwell Time For ID window
Alpha Scan Dwell Time
Delete Channel
Change Channel Name
Once you have activated the main OSD Window, you can open the Command
Menu by pressing either of the Control keys twice.
The Command Menu options are selected in the same manner as channels
in the OSD Window. Scroll the Highlight Bar up and down and press Enter
when your selection is highlighted.
THE COMMAND MENU
If you are operating in non-secure mode or are the system administrator, you
will have several options that do not appear in the User level Command Menu:
Add Channel, Edit Channel, Delete Channel and Administrator Functions
are all covered in separate sections in this chapter. Scanning is covered
in Chapter 6.
If you experience a loss of mouse signal while using the APC KVM Switch,
select the ‘Reset PS/2 Standard Mse/Kbd’ option from this menu for a PC with
a standard mouse driver or ‘Reset PS/2 Wheel Mse/Kbd’ if you are using a PC
with a Microsoft IntelliMouse or other wheel mouse driver. This will reset and
in most cases restore your mouse signal. These commands are equivalent to the
‘System Control & Maintenance’ section of this manual.
Choose the option ‘Version Information’ to display on your monitor the current
version level of your APC KVM Switch fi rmware. Press the Esc key to clear
this information from your screen.
4.3 The Command Menu