APC AP9268 - Manual (Page 12)

7
Basic Installation
10. Locate your next input cable. Repeat step 10 until all computers are properly
attached to the APC KVM Switch.
PS/2 KEYBOARD CABLE
PS/2 MOUSE CABLE
VGA MONITOR CABLE
AP9850 CABLE SHOWN
Connecting Computers to the APC KVM Switch
9. Locate the input cable appropriate to the computer you are connecting. (APC
KVM Switch cable types are identifi ed on page 6.) Plug this cable into any
numbered channel port on the rear of the APC KVM Switch. The other end of
the input cable will have up to three connectors depending on type. The PS/2
mouse connector is designated by a mouse icon.
Use only the keyboard and mouse connectors that are appropriate for
your machine, and leave the others unconnected.
Plug these connectors into the matching ports on your computer.