Also, Check the wireless printer card – HP Deskjet 460cb Mobile Printer User Manual
Page 92

Chapter 5 - Maintaining and troubleshooting
92
Problems setting up 802.11 or Bluetooth wireless
communication
If you have problems printing using an 802.11 or Bluetooth wireless connection, try the following
suggestions. For more information on configuring wireless settings, see
and
.
NOTE:
To enable 802.11 wireless communication, you must complete the wireless installation by running
the installer program on the Starter CD. You can set the wireless communication settings from the Toolbox
(Windows) if you are connected using a USB cable, but until you run the installer and set up the printer for
wireless communication, you cannot print using an 802.11 wireless connection.
Follow these general steps and use the information in the following sections to troubleshoot wireless
connection problems:
Windows
1.
Check the wireless printer card. See
Check the wireless printer card
.
2.
Check the wireless settings. See
3.
Manually assign the IP address for the printer in the Ports tab of the printer properties.
4.
PING the printer. See
Check the network communication
Mac OS
1.
Check the wireless printer card. See
Check the wireless printer card
.
2.
Delete and re-add the printer in the Print Center (Mac OS).
3.
PING the printer. See
Check the network communication
Check the wireless printer card
•
Make sure the wireless printer card is inserted properly. See
Installing the 802.11 or Bluetooth wireless
•
Make sure you inserted the wireless printer card before or after, and not during, printer initialization.
•
If the light on the wireless printer card is not on, do the following:
a. Remove the wireless printer card.
b. Turn off the printer, wait a few seconds, and then turn it back on again.
c. Reinsert the card when the printer is in the Ready state. If there is no response, repeat this
procedure a few times. If there is still no response, contact HP. See
•
To see if wireless printer card is working, try printing using another wireless device. If you still cannot
print, the wireless printer card might be faulty. Replace the card if necessary.