Remove the access panel – HP ProLiant DL385 G6 Server User Manual

Page 21

Text mode
Original mode

Operations 21

After performing the installation or maintenance procedure, slide the server back into the rack, and
then press the server firmly into the rack to secure it in place.

WARNING:

To reduce the risk of personal injury, be careful when pressing the server rail-

release latches and sliding the server into the rack. The sliding rails could pinch your fingers.

Remove the access panel

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

For proper cooling do not operate the server without the access panel, baffles,

expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize

the amount of time the access panel is open.

To remove the component: