HP Deskjet 970cxi Printer - Manual (Page 63)

56
A
6 Connect USB Cable.
• You can connect to any USB
port.
• If the New Hardware Found
Wizard dialog box does not
appear after you plug in the
USB cable, see “Frequently
Asked Questions About USB
(Universal Serial Bus)” on
page 67.
• A USB cable, such as an HP USB-Compliant Interface Cable (part number
C6518A), should be purchased separately
7 Install USB Software.
a Click Next .
The on-screen DeskJet printer
model number will match the
model number of the DeskJet
printer that you are installing.
b Click Next .
USB Cable
970C.book Page 56 Tuesday, February 1, 2000 11:31 PM