Use hp eprint – HP TopShot LaserJet Pro M275 MFP User Manual

Page 71

Use HP ePrint

Use HP ePrint to print documents by sending them as an e-mail attachment to the product's e-mail

address from any e-mail enabled device.

NOTE:

The product must be connected to a wired or wireless network and have Internet access to use

HP ePrint.

To use HP ePrint, you must first enable HP Web Services.

a. From the Home screen on the product control panel, touch the Web Services button.

b. Touch the

Enable Web Services

button.

From the

HP Web Services

menu, touch the

Display E-Mail Address

button to display the product's

e-mail address on the control panel.

Use the HP ePrintCenter Web site to define security settings and to configure default print settings

for all HP ePrint jobs sent to this product.

a. Go to

b. Click Sign In, and enter your HP ePrintCenter credentials or sign up for a new account.

Select your product from the list, or click + Add printer to add it. To add the product, you

need the printer code, which is the segment of the product e-mail address that is before the @

symbol.

NOTE:

This code is valid for only 24 hours from the time you enable HP Web Services. If it

expires, follow the instructions to enable HP Web Services again, and obtain a new code.

d. To prevent your product from printing unexpected documents, click ePrint Settings, and

then click the Allowed Senders tab. Click Allowed Senders Only, and add the e-mail

addresses from which you want to allow ePrint jobs.

e. To set up default settings for all ePrint jobs sent to this product, click ePrint Settings, click

Print Options, and select the settings that you want to use.

To print a document, attach it to an e-mail message sent to the product's e-mail address.

ENWW

Use HP ePrint