HP TopShot LaserJet Pro M275 MFP - Manual (Page 148)

11. Grasp the print cartridge by the center handle
and remove the protective plastic shield.
NOTE: Do not touch the print cartridge
roller. Fingerprints on the roller can cause
print-quality problems.
12. Remove the sealing tape from the print
cartridge. Place the tape in the print-cartridge
box to return for recycling.
13. Grasp the print cartridge by the center handle
and insert the print cartridge into the product.
NOTE: Compare the color label on the print
cartridge to the color label in the carousel slot
to make sure the print cartridge color matches
the carousel position. (The black carousel
position has no label.)
CAUTION: If toner gets on your clothing,
wipe it off with a dry cloth and wash the
clothing in cold water. Hot water sets toner
into the fabric.
14. Close the print cartridge door.
NOTE: After closing the print cartridge door,
the control panel shows the Calibrating...
message. Allow a few minutes for the product
to calibrate.
NOTE: If you need to replace another print
cartridge, you must close the print cartridge
door before touching the Cartridge Rotate
button again.
You do not need to wait for the product to
calibrate when replacing the second print
cartridge. Instead, touch the Cartridge Rotate
button to rotate the carousel into position. After
you have replaced the print cartridges, the
product calibrates.
138 Chapter 7 Manage and maintain ENWW