HP OneView for Microsoft System Center User Manual
HP Software
HP Device Monitor (v 1.2) for Microsoft
System Center User Guide
Abstract
This guide provides information on using the HP Device Monitor version 1.2 to monitor hardware components in an HP Insight
Control for Microsoft System Center environment. This information is for system administrators who use the HP Device Monitor
and other HP tools to manage hardware components.
HP Part Number: 678367-003
Published: July 2013
Edition: 1
Table of contents
Document Outline
- HP Device Monitor (v 1.2) for Microsoft System Center User Guide
- Contents
- 1 Overview
- 2 Using the HP Device Monitor Console
- 3 Using Windows PowerShell with HP Device Monitor
- 4 More about the HP Device Monitor
- 5 Device monitor performance and scalability guidelines
- 6 HP Device Monitor Service NT events
- 7 Troubleshooting the HP Device Monitor
- Introduction
- Device monitor management issues
- DMC operational and usage issues
- DMC connection to DMS service hangs after server power outage
- Unable to add OA through DMC
- Checking DMS operation
- Windows SNMP Trap Service is required for DMS but is disabled on servers using SCOM 2012 for network monitoring
- SCOM does not discover devices
- SCOM does not alert managed devices
- The DMC is unable to connect to the DMS
- The DMC is unable to connect to the DMS because of user credentials
- The DMC status line displays failure status
- A Linux or VMware ESX server is not displayed in the SCOM console after adding a device with the same host name
- A Linux or VMware ESX server is not displayed in the SCOM console after the device is updated
- Events are not being logged in the HP Device Monitor Event log when a non-administrator account is used
- Add Onboard Administrator does not add an unverified enclosure
- Downgrade of Onboard Administrator firmware is not supported
- Updating the password or community string
- Add Agentless Server option not displayed in the DMC
- Cannot launch the DMC from the SCOM console
- Operating System field in the DMC indicates “unknown”
- After changing the hostname of a device, the device is no longer displayed in the SCOM console.
- Active Alert view displays only one alert when there are multiple device state changes
- Add Virtual Connect Domain option not displayed in the DMC
- Active\Primary VC Module IP displayed in DMC instead of Domain IP when VC Domain IP changes.
- Re-creating already discovered VC Domain
- DMC cannot connect to DMS in different domain
- Postgres service fails to start after OS reboot
- 8 Support and other resources
- Index