Testing alert settings, Detected pair list – HP XP Command View Advanced Edition Software User Manual

Page 331

Includes the resource from which each alert was issued and information about the detected event
(copy pair status, performance information, or copy license usage). The maximum number of alerts
is 1,000.

•

List of alert settings
Includes the notification conditions such as the alert action (email or SNMP trap) and item being
monitored (copy pair status, performance information, or copy license usage threshold). The
maximum number of alert settings is 1,000.

•

List of copy group alert settings
Lists all copy groups and any alerts applied. You can also see which copy groups are not currently
monitored and create alerts as needed.

To view the list of alerts and alert settings, from the Explorer menu, choose Alerts and then Alerts.
The alerts that have been output and their settings are listed in the Alerts subwindow. (use the Copy
Groups tab to display a list alerts by copy groups).

To check the settings of a received alert, click the

icon.

Detected Pair List

Detected Pairs is displayed only when an alert is generated for a copy group and the alert automarking
feature is enabled (Marking Type: Auto is displayed in the Alert List tab of the Alerts subwindow). The
format is as follows:

pair-name[Primary-LDEV(Primary-Storage-System)-Secondary-LDEV(Secondary-Storage-System)]

For example:

Copy Pair1[01:01([email protected])-02:01([email protected])]

For mainframe pairs, the

pair-name

is omitted.

To limit the volume of information when an enormous number of pairs is involved, the display is limited
to ten pairs along with the following message:

More than 10 pairs were detected.